3% sodium chloride solution and Albuterol vs 7% saline

Posted by dianesk @dianesk, May 1, 2023

In January, I was diagnosed with a mild case of Bronchiectasis. My pulmonologist prescribed Albuterol and a 3% sodium chloride solution. From reading the posts, I rarely see anyone using Albuterol or a 3% solution. I was wondering if anyone was using Albuterol and or a 3% solution? Is Albuterol safe a long term solution? Does the 7% solution come into play as Bronchiectasis progresses? I've learned so much from these online discussions and am so appreciative of this special community.

Interested in more discussions like this? Go to the MAC & Bronchiectasis Support Group.

Thanks for that information. I noticed on the product information for the Pari Vortex that it said that the parts could be boiled to sterilize so I’m looking at that brand.

REPLY
@kathyhg

Thanks for that information. I noticed on the product information for the Pari Vortex that it said that the parts could be boiled to sterilize so I’m looking at that brand.

Jump to this post

I have been boiling my current one weekly for about a year. My pulmonologist generally replaces it and my Aerobika once a year.
Sue

REPLY

You’ve been boiling the correct or the aero chamber?

REPLY

Oops - the Pari vortex or the aerochamber?

REPLY
@harrynsc

I would get another pulmonologist or at least a second opinion.
Or an Infectious disease doctor.
Harry

Jump to this post

Unfortunately getting a new pulmonologist will not help. I actually fired my last one. This is pul #2. I am having a very hard time finding a dr who specializes in NTM and bronchiectasis in the L.A. area. I even called Nat'l Jewish Health and they had no info. I have learned a lot from our group and am very appreciative for the info.

REPLY
@kathyhg

Oops - the Pari vortex or the aerochamber?

Jump to this post

The Vortex. Made from metal (aluminum?) And silicon.

REPLY
@scoop

I'm thinking cleaning/ sterilizing should be under a different thread?
Best to follow manufacturers instructions for cleaning and then sterilizing. Some people use Medela micro-steam bags generally used for sterilizing baby bottles etc., or baby bottle sterilizers using previously boiled water. Some use rubbing alcohol or hydrogen peroxide (takes 3x longer than alcohol). Some use deposable neb cups and avoid sterilizing altogether. Wish there existed a small autoclave for neb gear. Baby bottle sterilizers are big. I've always wondered about UV light wands. Do they work on our stuff? Anyway, a good reminder I need to clean/sterilize my spacer!

https://www.amazon.com/gp/product/B00S0U5X18/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Jump to this post

Hi. New to the bronchiectasis world and am also thankful for this community! I have been thinking of getting a baby bottle sterilizer/dryer. But I hadn't thought of the need to use pre-boiled water. Is that necessary? I guess I am hoping to make things expedient where I can and there is so much info - and seemingly conflicting info - in equipment!

REPLY

Yes, best to use previously boiled water in your sterilizer. It's easy if you have a kettle. I boil water for tea then have boiled water for other uses. I even use it the next day. Some people use electric kettles for producing boiled water.

REPLY
@wsbme74

Hi. New to the bronchiectasis world and am also thankful for this community! I have been thinking of getting a baby bottle sterilizer/dryer. But I hadn't thought of the need to use pre-boiled water. Is that necessary? I guess I am hoping to make things expedient where I can and there is so much info - and seemingly conflicting info - in equipment!

Jump to this post

Hello, the answer to whether to preboil your water is the dreaded "It depends."
If you use a sterilizing method that keeps the water/steam at boiling for 10 minutes or longer, the answer is "No" to preboiling - the water is sterilized along with your devices.
If you use a baby bottle sterilizer, microwave sterilizer or similar, the answer is "Yes" to preboiling - the water is not kept at temperature for 10 minutes or longer.

I have chosen an old-fashioned method - once a week, I place a round silicon mat (pot holder) in the bottom of my 3 quart saucepan, place the items to sterilize & cover with water. Bring to a boil, set my timer to 11 minutes and do chores nearby. When the timer rings, I turn off the heat, cover the pot and let everything cool. There it is - one chore & done. No need to boil and bottle (in sterile containers, which must be sterilized each time) water, have another device on hand, etc.
Notes: This method works everywhere - home, winter home, camper, friends' homes...without carrying extra stuff from place to place.
The (optional) silicon mat keeps things from being in direct contact with the bottom of the pot - I accidentally melted the mouthpiece of my Aerobika once on a "hot spot" on my propane range.
A small crockpot, turned on high, also works - I run it for 2 hours and turn it off.
Sue

REPLY

I use levabuterol inhaler and 3% saline neb followed by Aerobika flutter valve. I just started today using the AD app. I have Broncheistasis and untreated Mac.

REPLY
Please sign in or register to post a reply.