Have Bronchiectasis, recently diagnosed with pseudomonas
I have read everything today that I find on this site. I do not know anyone else with problem. I have written down everything that stood out which I can follow up. I am beginning a 28 day therapy with inhaled tobramycin. I am 87 and realitively active. Caretaker part time for spouse with end stage COPD. Thanks for being here.
Interested in more discussions like this? Go to the MAC & Bronchiectasis Support Group.
Hi, I have heard also that pseudomonas can hide for years, and no doubt I've had it before it reared its ugly head big time this June. I do know there is a hospital acquired one too that is contagious. We hear/read so much stuff, I even wonder sometimes what all doctors know. I mostly hear from my doctor's medical assistant. Finding another doctor in southern AZ is difficult believe me.
Thanks, Pegs
S.Az. yes..Oh..I did not know about the other type of pseudomonas...🤔.
Best wishes.
I have been told by a doctor that the instruments used for example for bronchoscopes can harbor pseudomonas and that is fact how I got mine...pseudomonas first showed up in me a few months after the scope...coincidence? I think that's what is meant by "contageous". Pseudomonas also probably exists on vent equipment in hospitals.
@windwalker. I use my nebulizer once a day for clearing mucus, but I was never told to sterilize my nebulizer. Can you direct me to information on how to do that? Thank you.
@vmorton
Chiming in: I find the best way to figure out how to clean/sterilize nebulizers etc is to follow manufacturer's instructions. There's great info here on how/when to clean/sterilize but I find everyone manages differently. How rigorous you clean/sterilize all those plastic parts is dependent on disease state/status. For example, if you're fighting pseudomonas/MAC perhaps cleaning/sterilizing daily would provide peace of mind. If you're stable, then maybe once a week is ok. Those who are risk averse will sterilize everyday. Asking your doctor or RT is a good place to start.
@vmorton Welcome to Mayo Connect, where you will find many more helpful members like @scoop.
Don't feel bad about not knowing - my kids and I were "on the neb" for years before a respiratory therapist in the hospital (my daughter had intractable asthma) asked me about it. He was very helpful - and glad that we knew better than to share our nebulizer parts & tubing - just the compressor. He said he often had whole families using a single cup and mouthpiece, and constantly sharing infections.
So I'm not surprised about your doctor not saying anything about sterilizing. "Back in the day" they left those details to the nurse to explain, but now most don't have nurses on staff - usually a medical assistant... Also, since you have had lung issues for a long time, they probably just assumed you already knew.
In your unit's manual, you should find the instructions for cleaning and sterilizing your particular nebulizer. By the way, this is just the cup & mouthpiece. You would not sterilize the compressor, and the tubing should never accumulate moisture - if it does, leave the compressor running for 3-5 minutes after you detach the nebulizer and it will dry out.
By the way, did you know that your compressor probably also has a filter that should be replaced every 3-6 months, depending on use? Again, a little detail in the fine print of your manual.
Nebulizer cups and mouthpieces, as well as the tubing, should be replaced approximately every 3 months. There are many places on line where you can buy the parts, just be sure to get reusable ones, not disposable or one use only - they don't stand up to sterilizing. I usually buy mine 3 at a time, then order another 3 when I open the last one. I replace mine every 3-4 months (I use 3-4 times a week.) Also, if I get pneumonia or another exacerbation and have to nebulize meds and take antibiotics, I replace the nebulizer & tubing as soon as I am feeling better.
Have you replaced your nebulizer cup lately?
Sue
Thank you.
Thank you so much. I have been sterilizing the nebulizer parts, but did not know you should replace as well. I will get on this asap.
I bought a baby bottle, microwavable sterilizer from Amazon. I sterilize my plastic parts every time I use them. Hope this helps.
If you use a spacer for your inhaler, I found out you can sterilize it in a baby bottle sterilizer too. Will not melt or buy the metal one vortex non electrostatic holding chamber. You can sterilize it all possible ways. I learned about it on this forum and I am very greatful to all the people here who struggle themselves but also share to help others