Cleaning your nebulizer cup

Posted by kgggg @kgggg, Jun 7 1:08pm

Can you provide a definitive suggestion about what to use to clean my nebulizer cup? I’ve been told plain dishwasher detergent - With no anti bacterial or fragrance. Is this correct and if so any brands that you might recommend? Thnx.

Interested in more discussions like this? Go to the MAC & Bronchiectasis Support Group.

@sueinmn

At one house, I use a silicone hot pad that looks like a waffle, and I cut it to fit my small saucepan. At the other, I use a "universal" silicone pot lid that fits in the bottom - it was part of a set, and too small for any of my pans.
Also, I bring the water to a boil with the devices in the pan, then turn the water down to barely simmering & set the timer. When the timer rings, I shut the heat off and let it cool. By controlling the boil, the parts just rest on the mat and don't move around.

Jump to this post

Thank you so much. I will try this. I am a little concerned about leaving it at just a simmer, though. Maybe I am boiling too vigorously!

REPLY
@sanary

What to do when you are traveling and do not have access to a stove/ microwave? Would rinsing in the bathroom sink in hot water with liquid hand soap work?

Jump to this post

It could be a short term solution. For a nebulizer cup from Devilbiss intended for use for a month or less, the directions were to clean with soap and water after each use. Good luck!

REPLY

Do you also use a silicone matin the base of the pot? I have an old Reverewear pot with the bottom outside coated with copper. My parents got it when they first married, so it is about 70 yrs old! If it gives out, I will order the one you use!

REPLY
@formergardener

Do you also use a silicone matin the base of the pot? I have an old Reverewear pot with the bottom outside coated with copper. My parents got it when they first married, so it is about 70 yrs old! If it gives out, I will order the one you use!

Jump to this post

No need for the silicone mat with this pan. The cups go in the steamer part so no chance of any issue. It lifts right out when done.

REPLY
@formergardener

Do you also use a silicone matin the base of the pot? I have an old Reverewear pot with the bottom outside coated with copper. My parents got it when they first married, so it is about 70 yrs old! If it gives out, I will order the one you use!

Jump to this post

I'm with you - I am still using my 53yo wedding pots & pans, and resisting buying anything else at this stage in life, especially because my storage space is small. That is why I repurposed the silicone mat. In my tiny home in Texas, I did buy a small set of pots & pans, then found a silicone trivet to fit in the bottom.
By the way, using quality pots and pans, I have been cooking for 60 years, and only ever wore one out - the ceramic lining of my Le Crueset 5 qt kettle (bought in 1969) wore away to the bare metal- two years ago the company sent me a brand new one!

REPLY

I agree- if it still does the job, why replace it? I also have a similar piece of cookware that was worn down inside to the metal in one spot. Very sturdy piece.

REPLY
@irenea8

No need for the silicone mat with this pan. The cups go in the steamer part so no chance of any issue. It lifts right out when done.

Jump to this post

Some steamers do not submerge in the water. Does your equipment steam above the water?

REPLY
@formergardener

Some steamers do not submerge in the water. Does your equipment steam above the water?

Jump to this post

The cups boil in the water but they are kept from touching the bottom of the pan. It works great for the purpose.

REPLY

I do not line my pots with anything and have never had an issue of anything sticking or melting. The plastic parts tend to rise to the top. Maybe I've been lucky. Has anyone had an issues with this?

REPLY
Please sign in or register to post a reply.